Autofry mti-5 manual

Only after this expansion has finished should the oil level be increased to the upper FILL level. Page Power 3. That the front door is closed tightly and locked. That the fire system pressure gauge is in the Green charged area. If the display reads Prb. Never overload the food entry chute. Over loading will result in splashing.

Ice will cause boil over. Page During Cooking? A re-settable count and a total cumulative count. Page Stand-By Button This may be useful if you have a single product menu or multi-product menu with identical cook times. Key 3 1.

Press the 2 button. Press the 1 button to view or edit the pre-set cook time. Key 6 Press the 2 button. However, the use of a shortening monitor kit is the most accurate means of determining the status of the oil. Use extreme caution when cleaning around the fire system actuation cables and fusible link in the interior cabinet. If the AutoFry is not heating there are a few troubleshooting options to try. The High-Limit thermostat may need to be reset. Take a pen or pencil and push the red button five to six times.

The button should have one distinct click to reset. If there is a distinct click every time the red button is pushed this is an indication the High-Limit switch has failed.

Next, try cleaning the heater plug connections with a Q-tip and acetone. If there is any grease building up inside the plugs this can hinder the voltage from getting to the element. If cleaning these plugs is prolonged, damage to the plugs will occur. When the AutoFry becomes hot to the touch, it is usually an indication that the unit is not venting the hot air properly. First, check the exhaust fan on top for operation. A strong airflow should be emitted from the top of the unit.

Next, check the charcoal filter. The charcoal filter is designed to catch grease laden air moving through the ventilation stack. No Problem! Up to 4 lbs of product can be prepared per fry-cycle with the simple push of a button. The AutoFry MTIC is a compact dual-basket, countertop deep-fryer capable of producing up to 6 lbs of product per fry-cycle with the simple push of a button 3lbs per side.

The AutoFry MTIE is a dual-basket floor model designed to meet the requirements of high-volume food service operators, capable of producing up to 8 lbs of product per fry-cycle with the simple push of a button 4lbs per side. The MTIE provides the flexibility to operate each side independently and is available with a manual or automated oil filtration system.

Autofry Home Kitchen AutoFry.